Project index

100 field-tested plans. Filter by what you can afford, what you can already do, and what you can actually get hold of nearby.

9 plans · 1 filter active

A brick institutional rocket stove built up as a masonry block with sunken pot seats
Energy & CookingVerified Build

Insulated Brick Rocket Stove

A J-shaped combustion chamber that burns small sticks hot and nearly smoke-free, cutting cooking fuel by half or more.

$8 – $20, or free from reclaimed brick and clayBeginner
A rope pump installed over a well, lifting water with a looped rope and washers
Water & PurificationVerified Build

Rope-and-Washer Pump

A hand-cranked loop of rope with rubber washers that lifts water up to about 35 metres, built almost entirely from salvage.

$60 – $200 depending on depth and pipe costIntermediate
A treadle pump being demonstrated in Malawi, operator stepping on the twin pedals
Food & Farming

Treadle Pump for Smallholder Irrigation

A foot-powered twin-cylinder pump that lifts shallow groundwater or river water for a quarter-hectare plot without any fuel.

$70 – $180 in materials, or bought locally for around $100Advanced
Maize being shelled by hand into a woven basket in Uganda
Household & Enterprise

Hand-Cranked Maize Sheller

A simple drum-and-plate sheller that strips maize cobs several times faster than hand shelling, without bruising the grain.

$30 – $90 in steel, bearings and timberIntermediate
A crew hand-drilling a shallow well with auger rods turned by a T-handle
Water & Purification

Hand-Auger Borehole

Drill a small-diameter well by hand with a rotating auger and extension rods, then case and develop it — reaching cleaner water than an open dug well at a fraction of a rig's cost.

$400 – $900 for an auger set, casing, screen and pumpAdvanced
A multi-blade water-pumping windmill on a lattice tower with tail vane
Energy & Cooking

Windmill Water Pump

A multi-blade rotor on a guyed tower driving a piston pump down a shallow well — steady stock and irrigation water anywhere the wind blows most days.

$400 – $1,200 depending on tower height and pump depthAdvanced
Women processing shea kernels into butter in Ghana
Household & Enterprise

Manual Shea Butter Press

A bridge press with a screw jack that squeezes oil from roasted, ground shea kernels — cutting hours of hand-kneading and raising yield per basin.

$150 – $350 in steel and a jackAdvanced
Extruded biomass briquettes with hollow centres, made from bush biomass in Namibia
Energy & Cooking

Hand-Cranked Screw Briquette Extruder

A screw auger in a tapering barrel that extrudes a continuous log of compacted biomass — higher output than a piston press once the feedstock is right.

$120 – $400 depending on whether the auger is fabricated or salvagedAdvanced
A Pelton wheel runner showing the split spoon buckets around the rim
Energy & Cooking

Micro-Hydro Pelton Wheel

Where a stream drops ten metres or more, a spoon-bucket Pelton wheel on a penstock can run lights and charge batteries around the clock.

$300 – $1,200 including pipe, alternator and wiringAdvanced